Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Auf der COMSOL Conference 2026 stellten Ingenieure, Forscher und Wissenschaftler aus aller Welt ihre Nutzung von Modellierung und Simulation in allen wichtigen Branchen und im akademischen Bereich vor. Verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach Thema oder Veranstaltungsort.

Suchbegriff:

2013 - All

Modeling of a Magnetocaloric System for Electric Vehicles

A. Noume[1], C. Vasile[1], M. Risser[1]
[1]National Institute of Applied Science (INSA), Strasbourg, France

In automotive industry, regardless the type of engine we use, heating and air-conditioning is responsible for the highest energy consumption among all the auxiliary systems all over the year. For conventional vehicles with thermal engines, the heating of the internal space is easy ... Mehr lesen

Key-Holes Magnetron Design and Multiphysics Simulation

A. Leggieri[1], F. Di Paolo[1], D. Passi[1]
[1]Univeristy of Rome "Tor Vergata" - Department of Electronic Engineering, Rome, Italy

This paper describes the design and characterization of an 8 slots resonant cavity Magnetron, which undergoes thermal-structural effects due to cathode heating. The proposed study involves Thermal Stress, Eigen-frequency and Particle Tracing analysis based on COMSOL Multiphysics®. ... Mehr lesen

Investigating the Impacts of Hydrogeological Parameters on DSI Efficiency through Numerical Simulation

Y. Jin[1], E. Holzbecher[1], S. Ebneth[2]
[1]Department of Applied Geology, GZG, Georg-August- University of Göttingen, Göttingen, Germany
[2]Hölscher Wasserbau, Haren, Germany

Düsensauginfiltration (DSI),‘nozzle-suction-infiltration’, is a new method for dewatering that avoids groundwater abstraction from the aquifer. Drawdown is achieved via pumping of groundwater at upper abstraction section, meanwhile, all the pumped water is injected through the same ... Mehr lesen

Influence of the Excitation Frequency Increase up to 140 MHz on the VHF-PECVD Technology

S. Leszczynski[1], B. Leszczynska[1], M. Albert[1], J.W. Bartha[1], U. Stephan[2], J. Kuske[2]
[1]Dresden University of Technology, Semiconductor and Microsystems Technology Laboratory, Dresden, Germany
[2]Forschungs- und Applikationslabor Plasmatechnik GmbH, Dresden, Germany

The plasma enhanced chemical vapor deposition process with a linear plasma source and the frequency range up to 140 MHz developed by Dresden University of Technology and FAP GmbH Dresden enables a fabrication of thin film silicon layers at very high deposition rates. However, an increase ... Mehr lesen

Incoherent Propagation of Light in Coherent Models

A. Čampa[1], J. Krč[1], M. Topič[1]
[1]University of Ljubljana, Faculty of Electrical Engineering, Ljubljana, Slovenia

In the finite element based modeling and simulations only the coherent propagation of light is considered. However, in reality when light passes the thick layer it loses the phase information and its coherent nature due to the spatial, temporal or spectral incoherence. In this work, we ... Mehr lesen

Improvements on Liquid Cyclotron Target Loading/Unloading System Using COMSOL Multiphysics®

F. Alrumayan[1], A. Alghaith[1], J. Schneider, [1], M. Ahmed [1], M. Al-Qahtani[1]
[1]King Faisal Specialist Hospital and Research Centre, Riyadh, Saudi Arabia

A 3D model was developed using COMSOL Multiphysics® to study the flow dynamics of the water inside the geometry of the [13N] Ammonia target for medical application . The image attached shows a 3D model of the target. A significant improvement was noted after modifying the geometry as ... Mehr lesen

Homogenization Approaches for Laminated Magnetic Cores Using the Example of Transient 3D Transformer Modeling

H. Neubert[1], J. Ziske[1], T. Heimpold[1], R. Disselnkötter[2]
[1]Technische Universität Dresden, Institute of Electromechanical and Electronic Design, Germany
[2]ABB AG, Corporate Research Center Germany, Ladenburg, Germany

A specific issue in transformer modeling using the finite element method is the consideration of electric sheets or other laminated core materials which are used to reduce eddy currents. It would be impractical to explicitly model a large number of sheets as this would lead to a large ... Mehr lesen

Heat Transfer and Phase Transformation on Matrix Assisted Pulsed Laser Evaporation (MAPLE) of Biocompatible Thin Layers

E. Lacatus[1], G.C. Alecu[1], M.A. Sopronyi[2], A. Tudor[1]
[1]POLITEHNICA University of Bucharest, Bucharest, Romania
[2]INFLPR -National Institute for Laser Plasma and Radiation Physics, Bucharest, Romania

Matrix Assisted Pulsed Laser Evaporation (MAPLE) technique is used for the deposition of high quality biocompatible polymer thin films. During the deposition process the temperature of the laser target should be kept below 193K to assure the proper quality of both evaporation and ... Mehr lesen

Erste

481–488 of 506

Letzte

Veröffentlichungen und Präsentationen

Schnellsuche

COMSOL Conference 2025 Proceedings

Vom Program Committee akzeptierte Sammlung von Beiträgen, Postern und Präsentationen