Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
Electrolytic hydrogen production stands as a beacon of promise within the realm of sustainable energy technologies, owing to its remarkable potential for yielding hydrogen with high energy efficiency and enabling long-term energy storage. Among the gamut of hydrogen production ... Mehr lesen
Liquid atomization relies on a variety of forces that disturb the surface of the liquid. In the case of flow-blurring (FB) atomization, turbulent structures are induced within the liquid channel to achieve this effect. It is known that the transition from the conventional flow-focusing ... Mehr lesen
An attempt is made to study the gaseous flow in Resistive Plate chambers(RPCs)- A gaseous detector used in experimental physics for detection of particle behaviours. The present study is based on two phase laminar flow analysed through two methods(conservative Level-Set and Phase field ... Mehr lesen
The aim of the present work is to implement in COMSOL Multiphysics a multiphase fluid flow model in porous media, also known in the oil reservoir engineering literature as a black oil model, using a standard finite element approach. In particular, we are interested to apply this model ... Mehr lesen
The release of hydrogen from Liquid Organic Hydrogen Carriers (LOHC) is a highly volume-expanding, multiphase reaction with a high heat demand [1]. Platinum on porous alumina support is used as the catalyst for dehydrogenation. Since reactor design requires a deep understanding of the ... Mehr lesen
Renewable energies generate temporary mismatches between energy demand and supply. The conversion of surplus energy to hydrogen and its storage in geological formations is one option to balance this energy gap. Storage in deep saline aquifers is the most cost-effective option for ... Mehr lesen
Campi Flegrei (CF) is the largest active urbanized caldera in Europe, currently experiencing slow but progressive ground uplift and increasing seismicity since 2005. This deformation is marked by transient variations in uplift rates, with monotonic episodes lasting weeks to years. In ... Mehr lesen
Porous three-dimensional electrodes are promising for use in alkaline electrolyzer due to their high surface area. Nickel foams, specifically, serve a dual purpose as both a current collector and an active working electrode, enhancing current density and boosting hydrogen production[1]. ... Mehr lesen
Nowadays, gas and nuclear waste storage, shale gas and EOR exploitation rise the need to understand and predict the fate of multiphase flows in the underground. Various formulations for multiphase flow arise from different linear combinations of governing equations and choice of ... Mehr lesen
Introduction The COMSOL Multiphysics® software and its CFD Module have a physics interface for solving Laminar Two-Phase Flow problems using the Level Set method (1). This paper discusses how the tool may be used with more than two phases when the flow is laminar. It then introduces a ... Mehr lesen