Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
A simulation of the behavior of bulk solids continuously flowing through a silo with internal flow feeders has been performed by means of a dissipative hydrodynamic model. The results obtained by these calculations and those found experimentally agree, not only with regard to the ... Mehr lesen
Many scientific instruments are based on high vacuum equipment with a gas pressure maintained in the order of 1 Pa or below. The gas flow in the low pressure limit, called the molecular flow regime, is a case of transport with zero viscosity. The ability to solve an integral equation on ... Mehr lesen
Various types of equation system formulations for modeling two-phase flow in porous media using the finite element method have been investigated. These allow for equation manipulation such that the main differences between the formulations are the dependent variables that are solved ... Mehr lesen
Vortex-induced vibration is a major cause of fatigue failure in submarine oil and gas pipelines and steel catenary risers. Even moderate currents can induce vortex shedding. In this paper, COMSOL Multiphysics is applied to study the flow pattern around submarine pipeline spans, and ... Mehr lesen
CO2 capture and storage constitutes a promising solution to control and reduce these emissions. Wellbore integrity is a key challenge to ensure long term safety and for public acceptance. For this objective, a two-phase flow model in porous media based on Darcy’s law has been proposed to ... Mehr lesen
Innovations in air-conditioning and other forms of cooling or ventilation can be viewed as technological solutions improving environmental conditions that are beneficial for human health, comfort and productivity. This study deals with a thermal and fluid-dynamics investigation of ... Mehr lesen
Hazardous for the transmission lines is not only the static ice load, but also the aerodynamic instability of iced cables. It can lead to large amplitude oscillations at low frequencies. Also, twisting due to asymmetrical iced cables may increase the fatigue rate. In extreme events, ... Mehr lesen
In-situ electrical heating technologies are among the most recent technologies used for bitumen recovery from tar sand and oil shale. These technologies have limited environmental impact because there is little disturbance of the land, and water and solvents are not used. Two-phase ... Mehr lesen
This paper presents and discusses the first phase results of a wide ranging project concerning the study and prediction of the efficiency and energy performances of natural ventilation systems existing inside historic buildings. The air flow patterns, air temperature and air velocity ... Mehr lesen
This paper presents a study on the application of Direct Numerical Solving (DNS) techniques using an experimental scale model. COMSOL Multiphysics is promising in solving dynamic heat and air transport. The experiments can be extremely useful as benchmark for CFD codes. Mehr lesen