Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird
Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
In underground mining operations, the mined-out spaces (called stopes) need to be backfilled to maintain the stability of surrounding rock mass and increase the ore recovery. Cemented paste backfill (CPB), a mixture of water, binder, and tailings, has been intensively utilized in ... Mehr lesen
INTRODUCTION Our group at ORNL started using COMSOL Multiphysics® software shortly after version 3.0 was released in the Spring of 2004. After 11 years and several releases, the application usage has grown along with number of licenses we are responsible for. This paper will broaden ... Mehr lesen
Introduction: Developments intended to improve system efficiency and reliability for water and carbon dioxide separation systems to be used on crewed vehicles combine sub-scale systems testing and multi-physics simulations. This paper describes the development of simulations in COMSOL ... Mehr lesen
A frequently occurring geometry for heat exchangers is that of a long tube wound into a helix or spiral around a core volume. There is to be heat exchange between the tube and the gases (or solids) in the core. However, the length scales of these two parts of the geometry are very ... Mehr lesen
An external library, M4Dlib [1], has been developed to solve multiphysics problems coupled to solution thermodynamics. This approach extends the local equilibrium concept[2] to multiphysics modeling by incorporating a full Gibbs energy minimization routine at each numerical node to ... Mehr lesen
Standing column wells (SCW) are open-loop geoexchange systems used to provide space heating and cooling to buildings. As they use groundwater as heat carrier fluid and modify its thermo-chemical conditions along the year, they may favor calcite dissolution and precipitation, thus ... Mehr lesen
The Purpose of this paper is to develop a thermal model using COMSOL Multiphysics® software that aims to get an idea of the heat flow around the ASIC, as well as to address the thermal issues for integrated circuits at the tongue board. However, we need sources of heat simulations to map ... Mehr lesen
In a modern IC design, the capability of predicting the temperature profile is critically important as well as cooling and related thermal problems are the principal challenges. To address these challenges, thermal analysis must be embedded within IC synthesis. This paper presents ... Mehr lesen
This study presented the results of 3D unsteady CFD simulations to investigate the influence of adding a flat baffle plate at the entrance during the discharging operation on the flow behaviour, thermal stratification, and performance of a hot water storage tank installed in solar ... Mehr lesen
Ground freezing techniques using liquid nitrogen are commonly used in order to increase the mechanical properties of the soils. This article presents a new ground heat exchanger using aluminum to increase the effective radius of the heat exchanger. Simulation results indicate that the ... Mehr lesen