Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird

Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Suchbegriff:

Elucidating the Mechanism Governing the Cell Rotation Behavior Under DEP

G. Zhang[1], Y. Zhao[1], J. Brcka[2], J. Faguet[2], E. Lee[2]
[1]Clemson University, Clemson, SC, USA
[2]TEL U.S. Holdings, Inc., U.S. Technology Development Center, Austin, TX, USA

In our experiments with manipulating cells with DEP, we noted that some cells are constantly spining. By hypothesing that the cell spining is caused by the non-circular shape of the cell body and the off-centered location of its nucleus and that the rotation direction depends on the ... Mehr lesen

Effect of Electrical Field Distortion on Particle-Particle Interaction Under DEP

G. Zhang[1], Y. Zhao[1], J. Hodge[1], J. Brcka[2], J. Faguet[2], E. Lee[2]
[1]Clemson University, Clemson, SC, USA
[2]TEL U.S. Holdings, Inc., U.S. Technology Development Center, Austin, TX, USA

In using DEP for particle manipulation, researchers often use a formula to calculate the DEP forces in which the forces are proportional to the particle radius to the third power. This formula assumes that the electrical field, E, will not be affected by the presence of a particle, no ... Mehr lesen

Joule Heating in Electroosmotically Driven Circular Constriction Microchannel

U. Sanjay [1], P. Sarith[2], R. Ajith Kumar[1]
[1]Amrita Vishwa Vidhyapeetham, Kollam, Kerala, India.
[2]National institute of Technology, Calicut, Kerala, India.

Liquid transport in lab-on-a-chip (LOC) devices occurs through a microchannel that uses an electroosmotic flow actuation mechanism. This method has a plug-like velocity profile, which is ideal in species transport and in wall-bounded reactions. Under substantial joule heating, it is not ... Mehr lesen

Simulation of Thermal Transport Based Flow Meter for Microfluidics Applications

E. Byas[1], A. Arevalo[1], I.G. Foulds[1]
[1]King Abdullah University of Science and Technology, Thuwal, Saudi Arabia

COMSOL Multiphysics® is used to simulate a thermal transport based flow sensor, which will be embedded in a micro-channel of a Poly-methyl methacrylate (PMMA) based microfluidic device. The channel height is 100μm and for simulation purposes the lengths has been set to 1.2mm. The heater ... Mehr lesen

Modeling of Charge Transport in Ion Bipolar Junction Transistors

A.V. Volkov[1], K. Tybrandt[1], I.V. Zozoulenko[1], M. Berggren[1]
[1]Organic Electronics, ITN, Linköping University, Norrköping, Sweden

Modeling of an ion bipolar junction transistor (IBJT) is performed using the COMSOL Multiphysics® software. Our model describes the IBJT which was developed and characterized [1]. The IBJT under consideration consists of an anion-selective collector and emitter, a cation-selective base ... Mehr lesen

Optimized Channel Geometry of a Flow-Focusing Droplet Generator for Parallelization

D. Conchouso[1], E. Al Rawashdeh[1], D. Castro[1], A. Arevalo[1], I.G. Foulds[1]
[1]King Abdullah University of Science and Technology, Thuwal, Saudi Arabia

This document presents the Computational Fluid Dynamics (CFD) simulation of a commonly used Microfluidic Droplet Generator (MFDG) using the Laminar Two-Phase Flow, Phase Field method in COMSOL Multiphysics®. The paper discusses the effect of the channel’s geometry in droplet size at ... Mehr lesen

Modeling Partially Absorbing Biosensors

D. Kappe[1], A. Hütten[1]
[1]Bielefeld University, Bielefeld, Germany

Designing and constructing a lab-on-a-chip device poses a variety of questions. Transport of all required substances, detection of the analyte and its deposition on a sensor have to be incorporated. Different strategies have been developed to achieve good coverages of the sensor, like ... Mehr lesen

Air Foil Bearings - A Modeling Approach

M. Bezemer-Krijnen[1], Y.H. Wijnant[1], A. de Boer[1]
[1]University of Twente, Enschede, The Netherlands

A first generation air foil bearing (AFB) is shown in Figure 1. AFBs induce, at higher rotating speeds, an air film between the journal and the top foil, which lowers the friction forces. The goal of this study is to develop a model of an AFB. The thickness of the air film depends on ... Mehr lesen

Behavior Models of Virtual Impactors

R. Haft[1]
[1]Lawrence Berkeley National Laboratory, Hayward, CA, USA

A pocket-size portable particle size detector for diesel and cigarette smoke aerosols is being designed using particle size and composition methods. Aerodynamics, fluid properties, material composition and aerosol composition are taken into account. Testing methods for the design include ... Mehr lesen

Surface Acoustic Wave Properties (SAW) and Acoustic Streaming Characterization for Annular and Curved Electrodes on 128˚ Y-Cut, X-Propagating LiNbO3

G. Potter[1], N. Tokranova[1], S. Gattu[1], J. Castracane[1]
[1]SUNY College of Nanoscale Science and Engineering, Albany, NY, USA

Microfluidic devices and lab-on-a-chip (LOC) require the ability to transport or pump reagents or reaction products, the ability to effectively mix small volumes of fluid, and provide direct data display. Surface acoustic wave (SAW) driven acoustic streaming generated by a piezoelectric ... Mehr lesen

Erste

181–190 of 336

Letzte