Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation weltweit in der Forschung eingesetzt wird

Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.

Sehen Sie sich die Sammlung für die COMSOL Conference 2026 an

Suchbegriff:

Air Foil Bearings - A Modeling Approach

M. Bezemer-Krijnen[1], Y.H. Wijnant[1], A. de Boer[1]
[1]University of Twente, Enschede, The Netherlands

A first generation air foil bearing (AFB) is shown in Figure 1. AFBs induce, at higher rotating speeds, an air film between the journal and the top foil, which lowers the friction forces. The goal of this study is to develop a model of an AFB. The thickness of the air film depends on ... Mehr lesen

Behavior Models of Virtual Impactors

R. Haft[1]
[1]Lawrence Berkeley National Laboratory, Hayward, CA, USA

A pocket-size portable particle size detector for diesel and cigarette smoke aerosols is being designed using particle size and composition methods. Aerodynamics, fluid properties, material composition and aerosol composition are taken into account. Testing methods for the design include ... Mehr lesen

Surface Acoustic Wave Properties (SAW) and Acoustic Streaming Characterization for Annular and Curved Electrodes on 128˚ Y-Cut, X-Propagating LiNbO3

G. Potter[1], N. Tokranova[1], S. Gattu[1], J. Castracane[1]
[1]SUNY College of Nanoscale Science and Engineering, Albany, NY, USA

Microfluidic devices and lab-on-a-chip (LOC) require the ability to transport or pump reagents or reaction products, the ability to effectively mix small volumes of fluid, and provide direct data display. Surface acoustic wave (SAW) driven acoustic streaming generated by a piezoelectric ... Mehr lesen

Sensitivity Optimization of Microfluidic Capacitance Sensors

S. Satti[1], M. Baghini[1]
[1]Indian Institute of Technology Bombay, Mumbai, Maharashtra, India

As a part of a lab-on-chip-device, more often it is required to measure dielectric constant of the fluid. For this purpose it is necessary to develop a sensor whose size is compatible with microfluidic channel. The work, presented in this paper, studies effect of the parameters ... Mehr lesen

Design and Analysis of a Wetting Lens for the Pinhole Cameras of a Two Phase Flow System

A. K. Reddy[1], T. Satyanarayana[1]
[1]Lakireddy Balireddy Autonomous College of Engineering, Mylavaram, A.P., India

The present work reports the fabrication process of micro lens for pinhole cameras, modeled using COMSOL Multiphysics®, by satisfying the wetting properties. Wetting is a change in contact angle between the liquid and solid surface area. The wetting properties are clearly understood in ... Mehr lesen

Modeling and Simulation of the Rapid and Automated Measurement of Biofuel Blending in a Microfluidic Device under Pressure Driven Flow using COMSOL Multiphysics®

Sanket Goel[1], Venkateswaran PS[1], Rahul Prajesh[2], Ajay Agarwal[2]
[1]University of Petroleum & Energy Studies, Bidholi, Prem Nagar, Dehradun, India
[2]CSIR - Central Electronics Engineering Research Institute,(CSIR-CEERI) Pilani, India

• Real-time detection and monitoring of bio-fuel blend-ratio and adulterated automobile fuels by a reproducible micro-fabrication process in a cost-and-time efficient manner. • COMSOL Multiphysics® simulations and modelling of Viscosity based Laminar Flow inside a Y-shaped Micro ... Mehr lesen

Numerical Study of Microscale Heat Sinks Using Different Shapes and Fluids

H. Garg[1], A. K. Lall[2], Nidhi[3], V. S. Negi[1]
[1]Central Scientific Instruments Organisation, Chandigarh, India
[2]PEC University of Technology, Chandigarh, India
[3]UIET, Punjab University, Chandigarh, India

Microchannel heat sinks designed for applications in electronic cooling and having microscale heat transfer combine the attributes of high material compatibility, high surface area per unit volume ratios, and large potential heat transfer performance with a highly sophisticated and ... Mehr lesen

External Field Induced Flow Patterns in Microscale Multiphase Flows

D. Bandyopadhyay[1], A. Sharma[1], S. Timung[1], V. Tiwari[1], T. K. Mandal[1]
[1]Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati, Assam, India

The study of multiphase flows inside the microfluidic devices has received much attention recently because of its applications in heat and mass transfer, mixing, microreaction, emulsification and most importantly in MEMS and lab-on-a-chip. We study the influence of an electric field on ... Mehr lesen

Erste

251–258 of 355

Letzte