Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird

Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Suchbegriff:

Flow Simulation In A Submerged Membrane Bioreactor At Laboratory Scale

Y.M. Carreño-Martinez, J.M. Gozalvez-Zafrilla, J.A. Mendoza-Roca, and A. Santafé-Moros
Universidad Politecnica de Valencia, Spain

Submerged membrane bioreactor (SMBR) is an efficient technology for wastewater treatment that combines biological process and membrane filtration in one single stage. In the most usual configuration, submerged membrane hollow fibers are set in several planes. Air is introduced from the ... Mehr lesen

Modeling and Simulation of the Rapid and Automated Measurement of Biofuel Blending in a Microfluidic Device under Pressure Driven Flow using COMSOL Multiphysics®

Sanket Goel[1], Venkateswaran PS[1], Rahul Prajesh[2], Ajay Agarwal[2]
[1]University of Petroleum & Energy Studies, Bidholi, Prem Nagar, Dehradun, India
[2]CSIR - Central Electronics Engineering Research Institute,(CSIR-CEERI) Pilani, India

• Real-time detection and monitoring of bio-fuel blend-ratio and adulterated automobile fuels by a reproducible micro-fabrication process in a cost-and-time efficient manner. • COMSOL Multiphysics® simulations and modelling of Viscosity based Laminar Flow inside a Y-shaped Micro ... Mehr lesen

Computational Methods for Multiphysics Applications with Fluid-structure Interaction

P. Seshaiyer[1], K. Nong[1], S. Garcia[2], E. Aulisa[3], and E. Swim[4]
[1]George Mason University, Farifax, VA, USA
[2]United States Naval Academy, Annapolis, MD, USA
[3]Texas Tech University, Lubbock, TX, USA
[4]Sam Houston State University, Huntsville, TX, USA

Efficient modeling and computation of the nonlinear interaction of fluid with a solid undergoing nonlinear deformation has remained a challenging problem in computational science and engineering. Direct numerical simulation of the non-linear equations, governing even the most simplified ... Mehr lesen

Complex Geometry Creation and Turbulent Conjugate Heat Transfer Modeling

I. Bodey[1], R. Arimilli[1], and J. Freels[2]
[1]Dept. of Mechanical, Aerospace and Biomedical Eng., The University of Tennessee, Knoxville, TN
[2]Research Reactors Division, Oak Ridge National Laboratory, Oak Ridge, TN

The High Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL) is an 85 MW, light-water moderated, research reactor that operates at low temperature and high pressure. The HFIR is presently scheduled to convert from a high enriched uranium fuel (HEU) to a low enriched ... Mehr lesen

Modal Analysis of Elastic Ring Squeeze Film Damper for Small Gas Turbine Engines

S. Thennavarajan[1][2], P. Jeyaraj [1], L. P. Manikandan [2], S. S. Kulkarni [2], S. Jana [2],
[1]Department of Mechanical Engineering, NITK, Surathkal, Mangalore, Karnataka, India
[2]CSIR- National Aerospace Laboratories, Bengalore, Karnataka, India

The high speed gas turbine is a power plant developed for modern aircrafts. It is widely used and developed because it can meet the high power to weight ratio. The rotor system of modern small gas turbine works above the critical speeds. Hence, there is a stricter requirement for the ... Mehr lesen

Numerical Simulations Demonstrate Safe Vitrification and Warming of Embryos Using the Rapid-i™ Device

B.O.J. Johansson[1][2], Y.A. Tarakanov[1], H.J. Lehmann[2], and S.P. Apell[1]

[1]Department of Applied Physics, Chalmers University of Technology, Gothenburg, Sweden
[2]Vitrolife Sweden AB, Västra Frölunda, Sweden

During cryopreservation of human embryos, ice crystal formation in the embryos or in surrounding media may cause cryodamage to them and can be lethal. A strategy to avoid this is the vitrification procedure when the embryo and the surrounding medium undergo the transition to glassy state ... Mehr lesen

Simulation of Microwave Heating of Porous Media Coupled with Heat, Mass and Momentum Transfer

J. Subbiah[1], J. Chen[1], K. Pitchai[1], S. Birla[1], D. Jones[1]
[1]University of Nebraska, Lincoln, NE, USA

A microwave heating model coupled with heat, mass, and momentum transfer is needed to fully understand the microwave heating process. In this study a comprehensive 3D model was developed for studying the interaction of microwave with the food. The model includes physics of Maxwell’s ... Mehr lesen

SAW Sensors for Surgical Arm using Piezoelectric Devices

Rakesh Kumar Pati [1], SK Mohammed ali[1], Sakuntala Mahapatra[1], Millee Panigrahi[1]
[1]MEMS Design Centre, Dept. of ETC, Trident Academy of Technology, Bhubaneswar, Odisha, India

Despite of the existing successful clinical applications, however, the interaction, i.e. artificial sensing, between the robot and the patient is still very limited. With the help of various cameras, vision is almost the only feeling that a robot can have. In order to imitate the human ... Mehr lesen

Particle Beam Tracking with COMSOL Multiphysics® Software

O. Karamyshev[1], L. J. Devlin[1], C. P. Welsch[1]
[1]University of Liverpool, Liverpool, UK

Accurate and efficient tracking is important for designing particle accelerators as well as many other applications which use electromagnetic fields to control particles. We have developed a tracking code in MATLAB® Simulink® which uses electric and magnetic fields calculated in COMSOL ... Mehr lesen

A Three Dimensional (3D) Thermo-Hydro-Mechanical Model for Microwave Drying

T. Gulati[1], H. Zhu[1], A. K. Datta[1]
[1]Department of Biological & Environmental Engineering, Cornell University, Ithaca, NY, USA

Microwave drying of foodstuffs is a complex interplay of mass, momentum, and energy transport coupled with large deformation of the solid. To be able to better understand the microwave drying process, a fundamentals-based three dimensional (3D) multiphase porous media based model is ... Mehr lesen

Erste

1171–1180 of 1391

Letzte