Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird

Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Suchbegriff:

Thermal Design of Power Electronic Devices and Modules

N. Delmonte[1], M. Bernardoni[1], P. Cova[1], and R. Menozzi[1]
[1]Dipartimento di Ingegneria dell’Informazione, University of Parma, Parma, Italy

This work describes a way to apply 3D Finite Element Analysis (FEA) to the thermal design of power electronic modules using simplified geometry models of the system components. The method here presented can overcome the problem of solving equation systems with a very high number of ... Mehr lesen

COMSOL Multiphysics^® as a General Platform for the Simulation of Complex Electrochemical Systems

A. Lavacchi[1]
[1]Department of Chemistry, University of Firenze, Sesto Fiorentino, FI, Italy

Microelectrodes demonstrate that modeling is crucial for understanding the behavior of complex electrochemical systems. The use of the finite element methods in electrochemistry may be of much more general interest for its ability to handle complex geometries. In this context a ... Mehr lesen

Thickness Optimization of a Piezoelectric Converter for Energy Harvesting

M. Guizzetti[1], V. Ferrari[1], D. Marioli[1], and T. Zawada[2]

[1]Dept. of Electronics for Automation, University of Brescia, Brescia, Italy
[2]Meggitt, Ferroperm Piezoceramics A/S, Kvistgaard, Denmark

The conversion of mechanical energy from environmental vibrations into electrical energy is a key point for powering sensor nodes toward the development of autonomous sensor systems. Piezoelectric energy converters realized in a cantilever configuration are the most studied for this ... Mehr lesen

Permanent Magnet Arrangements for Low-Field NMR

C. Horch[1], S. Schlayer[1], and F. Stallmach[1]
[1]Faculty of Physics and Earth Sciences, University of Leipzig, Leipzig, Germany

For low-field NMR (Nuclear magnetic resonance), NdFeB permanent magnet arrangements are proposed to provide the static polarizing magnetic field. Especially a parallel and a circular arrangement of the permanent magnets, iron yokes and small shim magnets were tested and improved by ... Mehr lesen

Numerical Validation of the Efficiency of Dual-Frequency Radiofrequency Ablation

A. Candeo[1] and F. Dughiero[1]
[1]Department Electrical Engineering, University of Padova, Padova, Italy

Radiofrequency Ablation (RFA) represents a valid alternative for treating liver metastases in medically complicated patients. Conventional devices currently operate at 500 kHz, due to good conducting properties of tissues. However, the use of lower frequencies (i.e. 20 kHz) has been ... Mehr lesen

A Finite Element Model for The Axon of Nervous Cells

S. Elia[1], P. Lamberti[1], and V. Tucci[1]
[1]Dept. of Electrical and Information Engineering, University of Salerno, Salerno, Italy

This paper proposes a FEM model for a segment of a nervous cell axon, which takes into account, through the so called Hodgkin-Huxley equations, the non linear and time varying dynamics of the membrane surrounding it. A combination with Maxwell equations is performed in a numerical ... Mehr lesen

Fast 2D Simulation of Superconductors: A Multiscale Approach

V.M. Rodriguez-Zermeno[1], M.P. Sørensen[1], N.F. Pedersen[2], N. Mijatovic[2], and A.B. Abrahamsen[3]
[1]DTU Mathematics, Lyngby, Denmark
[2]DTU Electrical Engineering, Lyngby, Denmark
[3]Materials Research Division, Risø, DTU, Roskilde, Denmark

This work presents a method to calculate AC losses in thin conductors such as the commercially available second generation superconducting wires through a multiscale meshing technique. The main idea is to use large aspect ratio elements to accurately simulate thin material layers. For a ... Mehr lesen

The Acoustoelastic Effect: EMAT Excitation and Reception of Lamb Waves in Pre-Stressed Metal Sheets

R.M.G. Ferrari[1]
[1]Danieli Automation S.p.A., Buttrio, UD, Italy

The acoustoelastic effect relates the change in the speed of an acoustic wave travelling in a solid, to the pre-stress of the propagation medium. In this work the possibility of assessing nondestructively the stress status in metal sheets, by using the acoustoelastic effect, is ... Mehr lesen

Failure Modes of Underground MV Cables: Electrical and Thermal Modelling

P.A. Wallace[1], M. Alsharif[1], D.M. Hepburn[1], and C. Zhou[1]
[1]Department of Energy Systems Engineering, Glasgow Caledonian University, Glasgow, United Kingdom

Two simulations of the performance of a Paper Insulated Lead Covered (PILC) Medium Voltage (MV) underground cable are presented. The first presents the thermal response of a cable, over seven days, to a realistic load with a diurnal variation. The second concentrates on the variation of ... Mehr lesen

3D Electro-Thermal Study for Reliability of Automotive Power Vertical MOSFET Using COMSOL Multiphysics^®

T. Azoui[1], S. Verde[1][2], J.B. Sauveplane[1], and P. Tounsi[1]
[1]LAAS-CNRS, Toulouse, France
[2]Department of Electronics and Telecommunications Engineering, University of Naples Federico II, Naples, Italy

In this paper 3D electro-thermal FE Model using COMSOL Multiphysics® software of power vertical MOSFET used in the automotive industry is presented. This model is used to analyze the effects of bonding wire lift off defect and to study the influence of metallization thickness and ... Mehr lesen

Erste

1521–1530 of 1762

Letzte