Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird

Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Suchbegriff:

Electro-Thermal Analysis of a Contactor: Comparing the Performance of Two Braze Alloys during the Temperature Rise Test

E. Gutierrez-Miravete[1], and G. Contreras[2]
[1]Rensselaer at Hartford, Hartford, CT, USA
[2]General Electric Co., Plainville, CT, USA

The purpose of this study was to develop mathematical models of the coupled electro-thermal process in selected, typical contactors that could then be validated and verified by comparing model predictions with the results of previous studies and with experimental data obtained during a ... Mehr lesen

Field Joint Coatings for Deep Sea Pipelines

R. Verhelle[1], L. Van Lokeren[1], S. Loulidi[1], H. Boyd[2], G. Van Assche[1]
[1]Physical Chemistry & Polymer Science, Vrije Universiteit Brussel, Brussels, Belgium
[2]Heerema Marine Contractors, Leiden, The Netherlands

COMSOL Multiphysics® software is used to model the field joint application process on carbon steel pipelines for deep sea crude oil transportation, taking into account not only heat transfer, cure kinetics, and crystallization, but also thermal, cure and crystallization shrinkage and the ... Mehr lesen

Current Density Distribution for a Full Scale Industrial Alluminization Process

A. Giaccherini [1], S. Martinuzzi [2], E. Berretti [1], A. De Luca [3], A. Lavacchi [4], S. Caporali [2], M. Innocenti [3]
[1] Chemistry Department, University of Firenze, Firenze, Italy
[2] Consorzio INSTM, Firenze, Italy
[3] Chemistry Department, University of Firenze, Firenze, Italy
[4] Institute of Chemistry of Organometallic Compounds, CNR, Firenze, Italy

Respect to the previous approaches, in this communication the electrochemical and chemical kinetics as well as the transport phenomena, were modelled at very high level of theory, taking into account all the parameters affecting the galvanic process, including turbulent convection ... Mehr lesen

Multiphysics Analysis of a Thermo-Acoustic MHD Inductive Generator

R. Forcinetti [1], S. Carcangiu [1], A. Montisci [1],
[1] DIEE, University of Cagliari, Cagliari, Italy

Magneto-Hydrodynamic (MHD) power generation systems were originally investigated starting from the fact that the interaction of a plasma with a magnetic field must take place at much higher temperatures than could be observed in a mechanical turbine. The main problems of traditional MHD ... Mehr lesen

An Improved Model for High Temperature Inductive Heating

S. A. Halvorsen, and N. Kleinknecht
Teknova AS
Kristiansand, Norway

An axially symmetric multiphysics model for industrial induction furnaces has successfully been converted from COMSOL Multiphysics version 3.5a to version 4.2. The model combines computation of magnetic fields, heat transfer and thermal stresses. The inner part of the furnace is ... Mehr lesen

Inverse Problem and a New Device to Estimate Thermal Conductivity of Composite Phase Change Material

M. Karkri [1], A. Nachaoui [2]
[1] Université Paris-Est, CERTES, Créteil Cedex, France
[2] Département de Mathématiques 2, Nantes Cedex, France

A new experimental device has been developed in order to characterize the phase change material (PCM) thermal properties (thermal conductivity k, sensible and latent heat thermal energy storage, cp and Lf) in the solid phase, during the solid-liquid transition and in the liquid phase. It ... Mehr lesen

Optimizing Electrode Surface Area by COMSOL Multiphysics®

B K SRIHARI[1], Dr K Nagarajan[1], Dr B Prabhakar Reddy[1], P VENKATESH[1]
[1]Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu, India

In the design of electrorefiner, Working electrode and Counter electrode surface areas are very important. The main aim of this study is to understand the effect of the ratio of Anode to cathode Surface areas in an electrorefining cell. Application of this model to design electrorefiner ... Mehr lesen

Simulation of Laser-Material Interactions for Dynamic Transmission Electron Microscopy Experiments

B.W. Reed[1], T.B. LaGrange[1], G.H. Campbell[1], and N.D. Browning[1,2]
[1]Lawrence Livermore National Laboratory, Livermore, CA, USA
[2]University of California Davis, Davis, CA, USA

The Dynamic Transmission Electron Microscope (DTEM) at Lawrence Livermore National Laboratory is a unique instrument able to capture images of fast-evolving microstructure with exposure times of only 15 ns. This is more than six orders of magnitude faster than conventional in situ ... Mehr lesen

Time-Dependent Thermal Stress and Distortion Analysis During Additive Layer Manufacturing, by Powder Consolidation by Laser Heating

M.S. Yeoman[1], J. Sidhu[2]
[1]1. Continuum Blue Ltd., Tredomen Innovation & Technology Park, Tredomen, Ystrad Mynach, United Kingdom
[2]BAE Systems, Advanced Technology Centre, Bristol, United Kingdom

A time-dependent COMSOL Multiphysics model of an additive manufacture process, which uses powder consolidation by laser heating was developed, providing a platform to better understanding the manufacture process & provide a tool to reduce resulting distortion & optimization of an ... Mehr lesen

Three-Dimensional Numerical Study of the Flow Past a Magnetic Obstacle

M. Rivero[1], O. Andreev[2], A. Thess[3], S. Cuevas[4], T. Fröhlich[1]
[1]Institute of Process Measurement and Sensor Technology, Ilmenau University of Technology, Ilmenau, Germany
[2]Helmholtz-Zentrum Dresden-Rossendorf e. V., Institut für Sicherheitsforschung Abteilung Magnetohydrodynamik, Dresden, Germany
[3]Institute of Thermodynamics and Fluid Mechanics, Ilmenau University of Technology, Ilmenau, Germany
[4]Instituto de Energías Renovables, Universidad Nacional Autónoma de México, Temixco, Morelos, México

Flows of electrically conducting liquids in external magnetic fields are present in several applications. In this kind of flow, the inhomogeneous magnetic field creates a breaking force on the conducting fluid. As a result, a stagnant zone is formed in the zone affected by the localized ... Mehr lesen

Erste

151–160 of 178

Letzte