Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird
Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
In the modern food industry one of the most important problems to face is to preserve products from deterioration: a widely used solution is the convective foods drying. Drying is based on a simultaneous transfer of both heat and water that takes place when dry and warm air flows around ... Mehr lesen
Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium to low-enriched uranium fuel are ongoing at ORNL as part of an effort sponsored by the U.S. Global Threat Reduction Initiative program. HFIR is a very high flux, ... Mehr lesen
Heat transfer in a plane shear flow configuration consisting of two infinitely long parallel plates is considered. In laminar flows over undulated substrates eddies can be generated due to the kinematical constraints. A closed form analytical solution for the velocity field, based on ... Mehr lesen
Solar radiation is a prominent contributor of energy in buildings, and can be transmitted directly into a building through opaque surfaces, but it can also be absorbed by building components (i.e. walls, roofs etc.). This study discusses the use and effect of ventilated facades, with an ... Mehr lesen
In the molding industry, high productivity rate, low energy consumption, large 3D parts, and homogeneous temperature distribution are the main targets. The 3iTech® inductive technology developed by RocTool ensures both good temperature homogeneity and short heating time. Conventionally, ... Mehr lesen
Arcam AB has pioneered additive manufacturing using the electron beam melting (EBM) technology which provides a cost efficient and novel way of producing titanium components for the orthopedic and aerospace industries. In the heart of the EBM technology is the electron beam – whose ... Mehr lesen
COMSOL-based modeling software developed at Ostendo Technologies allows detailed simulation of semiconductor lasers and light-emitting diodes. In this work, we study the inhomogeneity of the carrier injection into optically active quantum wells of polar and nonpolar III-nitride light ... Mehr lesen
Lithium-sulphur (Li-S) batteries have the potential to surpass the energy storage capability of Li-ion batteries due to their high theoretical gravimetric energy density of 2700 Wh/kg. However, the processes which drive the system behaviour are much more complex than those in a Li-ion ... Mehr lesen
The actuation system of the deformable mirror is one of the crucial components of an Adaptive Optics unit. One possible implementation comprehends a linear force motor and a capacitive sensor providing the feedback measure signal. Choosing a magnetic circuit that makes optimum use of the ... Mehr lesen
As interest in the electromagnetic spectrum expands towards the infrared and terahertz range, the distinct advantages of using semiconductors instead of metals for plasmonic applications must be understood. Plasmonic resonances in gold (Au) and indium nitride (InN) gratings are studied, ... Mehr lesen