Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
Magnetic levitation systems have been studied in the context of high-speed transportation as maglev trains, high speed machinery as magnetic bearings, and other similar engineering applications. In this paper, a three dimensional arbitrary shaped object is modeled and analyzed through ... Mehr lesen
This paper illustrates how to set up and solve a two-dimensional flow problem having dimensions of 640 x 320 micro-meter using the Navier-Stokes equations with the help of COMSOL Multiphysics solver. The principle of our pore-scale modeling approach is composed of two steps. The first ... Mehr lesen
A laboratory-scale fluorine reactor was simulated with COMSOL Multiphysics®. This model employs fundamental fully coupled electron-, heat-, mass- and momentum transfer (two-phase) equations to deliver a transient model of the above-mentioned reactor. Quasi-steady-state results were ... Mehr lesen
The complex behavior of biological prosthetic heart valves was simulated. A multiphysics computational approach was adopted using different modules of COMSOL Multiphysics: the LiveLink(TM) interface was used to exchange the valve geometry with CAD, Structural Mechanics Module to set ... Mehr lesen
In this study, the dam-break type two-dimensional gravitational collapse of rectangular granular piles in air was numerically studied. The frictional behavior of the material was based on the von-Mises model with the Mohr-Coulomb yield surface leading to pressure and strain-rate ... Mehr lesen
This paper reports the modelling and analysis of three dimensional negative dielectrophoretic traps for cell trapping applications. Dielectrophoresis is a well-established technique for cell analysis and cell trapping. Planar electrodes, at the bottom of a microfluidic channel, have been ... Mehr lesen
Composite behavior when undergoing to low energy impact has been investigated thorough modelling and simulation computation. We consider the dynamic impact among a small granular material piece and a large composite material body. Really, our investigation will to simulate the ... Mehr lesen
This research deals with the design of suitable microreactors for the catalytic oxidation of volatile organic compound (VOCs), using propane as a model molecule. The microreactor considered consists of eleven parallel channels, in which an Au/Cr/γ-Al2O3-catalyzed combustion reaction ... Mehr lesen
The extensional flow of viscoelastic flow is encountered during fibre spinning processes. A variety of polymers such as polyesters, polyacrylonitrile, rayon, acrylic, spandex etc are manufactured using this process. In the spinning process, polymer melt/ solution is extruded in the form ... Mehr lesen
Acoustic streaming (AS) describes a physical phenomenon where an oscillating sound emitter induces a steady fluid motion. Metal processing industry applies this treatment for grain morphology adjustments during the solidification of metal. Improvement and further development of this ... Mehr lesen
