Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
This study allows to establish the possibility to carry out the pyrolysis of mixtures of ethane-propane in an existing steam-cracking reactor (SCR) originally designed for ethane pyrolysis. The final goal of this study was to minimize new investments, e.g. a purchase of new equipment, ... Mehr lesen
Oxygen delignification is a technology established worldwide and a common operation in pulp mills that use Kraft cooking. The reasons for using this technology are the reduction of organochlorine compounds in the effluents, and economy of chemicals in the bleaching stage. The objective ... Mehr lesen
Intermediate heat exchanger (IHX) in a pool-type liquid metal cooled fast breeder reactor is an important heat exchanging component as it transfer heat from the radioactive primary sodium in the pool to the non-radioactive secondary sodium. The secondary sodium ultimately heats up water ... Mehr lesen
A general purpose stainless steel micro reactor setup for methane conversion is being designed for research purposes. We intend to design and build a modular device that would be able to manage different types of reactions depending on the installed modules. The device should be able to ... Mehr lesen
Gas to liquid (GTL) technology can convert methane from the natural gas to liquid fuels and other valuable hydrocarbons which can then be quickly and efficiently transported. The catalytic Fischer-Tropsch (FT) synthesis is the most critical step of the GTL process, as it is in this step ... Mehr lesen
A defining characteristic of atomic layer deposition (ALD) is the sequential exposure of a surface to self-limiting, saturating reactions. Temporal ALD operates through intermittent purge cycles, while spatial ALD relies on physical separation accomplished by delivering reactants through ... Mehr lesen
In the poster you can see a project where using computational tools like the COMSOL Multiphysics® software, hydrodynamics of a photo electrocatalytic reactor was studied. It was evident that the influential factor is the geometry of inlet and exit header. Therefore, these changes were ... Mehr lesen
Nitrogen oxides are one of the more dangerous ingredients contaminating the atmosphere. They are considered to be almost ten times more harmful than carbon monoxide, and sulfur dioxide several times. A whole range of photochemical reactions involving nitrogen oxides are responsible for ... Mehr lesen
Chlorine reactor is used to dry molten LiCl-KCl eutectic salt before it is put to use in electrorefining operation. Molten salt electrorefining is a pyrochemical method of separation of heavy elements from spent metallic nuclear fuel. It is a high-temperature process which uses molten ... Mehr lesen
Hydrodynamics of fixed bed reactors involve complex interactions of gas and liquid phases with packed solids. Such complex interactions manifest in different flow regimes occurring in trickle-bed reactors. A comprehensive CFD model was developed to predict measured hydrodynamic ... Mehr lesen
