Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
Lab-on-a-chip devices for cell culturing are becoming imperative in order to satisfy the needs for point-of-care or decentralized laboratory testing. Towards that goal we have developed miniaturized membrane based cell culture chambers for use within the field of chromosome analysis. The ... Mehr lesen
The aim of the proposed device is to overcome the typical drawbacks of MHD generators, such as the needed of a very high external magnetic field, the strong dependency of the efficiency by the temperature of the fluid, and the deterioration of the electrodes that are in contact with the ... Mehr lesen
Electro-active polymer (EAP) based actuators are one of the suitable contenders for use in artificial muscles based bio-medical application because of their bio compatibility and lower active actuation voltage requirement phenomenon. At present Ionic polymer metal composites (IPMC), a ... Mehr lesen
In this study, a model of in-situ geothermal energy piles was constructed using COMSOL Multiphysics® software. Geothermal energy piles serve two purposes, first to transfer building load into the subsurface, but also to extract thermal heat from surrounding soils. This is achieved using ... Mehr lesen
A new simple air-cooled inverter design is numerically investigated using COMSOL Multiphysics® software. The thermal-fluid analysis is based on a three-dimensional conjugate heat transfer model in which the flow field is assumed to be laminar. A rigorous mesh convergence was performed to ... Mehr lesen
During the welding of tantalum with a ND: YAG pulsed laser, a deep and narrow cavity, called the keyhole, is formed. At the end of the process, surface tension forces provoke the collapse of the keyhole. For important interface deformations, gas bubbles can be trapped into the melting ... Mehr lesen
Dielectrophoresis is a phenomenon in which a force is exerted on a dielectric particle when it is subjected to a non-uniform electric field. In this research, we analyze dielectrophoretic (DEP) force using a geometry containing two electrodes, one with SiO2 and one without, with a gap ... Mehr lesen
With the evolving trend of electrification in transportation, electric machines with higher power density and higher efficiency are demanded which results in the thermal limit of the stator winding becoming more of a key constraint. The achievable current density in stator windings is ... Mehr lesen
This paper presents the approach taken through the utilization of COMSOL Multiphysics 3.5a, to develop a model that simulates the flow of a magnetorheological (MR) fluid through a micro-channel. The model was developed as an aid in the analysis of a micropump that produces flow by means ... Mehr lesen
Electrowetting (EW) has found a wide range of the potential applications including fast response displays, lab-on-a-chip microfluidic devices, and light vales. However, fundamental understanding of dynamics of EW-actuated droplet is not clear. In this work, a combined numerical approach ... Mehr lesen
