Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
This study presents a model for simulating a subsurface pumped-hydro energy storage (battery) system. The model captures the coupling between fluid flow in an oil and gas type wellbore connected to a large hydraulic fracture embedded in a low-permeability reservoir. By integrating ... Mehr lesen
Failure of conventional lead-acid battery is attributed to degradation of solid active mass (PbO2 and PbSO4 ). A number of research efforts are underway worldwide to overcome degradation of active mass to improve the cycle life of lead-acid batteries. Soluble lead-acid flow battery ... Mehr lesen
The characterization of Li-ion batteries is a relevant topic due to the recent developments in Electric Vehicles (EV’s) and Hybrid Electric Vehicles (HEV’s) applications. In order to manage these devices, accurate models are required. At NEXT ENERGY a two dimensional cell-level thermal ... Mehr lesen
Our customer LeydenJar Technologies creates the world’s most energy dense battery anodes, enabling Li-ion batteries that are powerful, small and fast charging. Prime examples of applications include electronic devices and e-mobility. The anodes are made of silicon, and are produced with ... Mehr lesen
Introduction: The drawbacks of most commercial “advanced battery” solutions are high price, danger, and low recyclability. The most cost efficient, environmental-friendly, and safest solutions so far is based on lead-acid electrochemistry, a proven technology for more than 150 years. Key ... Mehr lesen
With a view to estimating electrical characteristics of a Polymer Li-ion Battery during specific charge and discharge conditions, a COMSOL Multiphysics® model has been developed that accounts for electrochemical phenomena inside the device. Cell model has been created using the Li-Ion ... Mehr lesen
Introduction: Recently, Li-ion battery is being widely used as power source for various applications from electronic gadgets to automotive industry. The performance and cycle life of Li-ion battery are becoming gradually important issues as the applications are shifting from small scale ... Mehr lesen
Abstract: A 3.2V/10Ah LFP aluminum-laminated batteries are chosen as the target of the present study. A three-dimensional thermal simulation model is established based on finite element theory and proceeding from the internal heat generation of the battery[13]. The study illustrates a ... Mehr lesen
In general battery cells are charged/discharged using constant current or constant power expressed as C-Rates and P-Rates respectively. We are developing a single cell-level Li-Ion battery model in order to simulate the performance and the physicochemical phenomena under power ... Mehr lesen
This case study explains the work we undertook where we modelled an Induction heating system in COMSOL Multiphysics simulation software to correlate the simulation results with actual measurements. The simulated results were cross checked with several different measurement scenarios, ... Mehr lesen
