Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird

Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Alle

Boston 2024

Suchbegriff:

"electromagnetic*"

COMSOL Multiphysics® Software as a Metasurfaces Design Tool for Plasmonic-Based Flat Lenses

B. Adomanis [1], D. B. Burckel [2], M. Marciniak [1],
[1] Air Force Institute of Technology, Wright-Patterson AFB, OH, USA
[2] Sandia National Laboratories, Albuquerque, NM, USA

Introduction: Flat lenses require precise control of a phase gradient across an interface, which is enabled through the application of engineered surfaces, such as Metasurfaces [1]. Periodic arrays of plasmonic antennas have been utilized to generate this desired phase gradient, which ... Mehr lesen

Modeling, Simulation and Verification of Contactless Power Transfer Systems

J. Serrano [1], C. Carretero [1], J. Acero [1], I. Lope [1]
[1] University of Zaragoza, Zaragoza, Spain

This work presents the analysis of a wireless power transfer system consisting of two coupled coils and ferrite slabs acting as flux concentrators. The study makes use of Finite Element Method (FEM) simulations to predict the key performance indicators of the system such as coupling, ... Mehr lesen

Biological Effects of Microwave Radiation

S. Kumari[1], S. Raghavan[1]
[1]National Institute of Technology Tiruchirappalli, Tiruchirappalli, Tamil Nadu, India

Microwave technology has provided with many exciting new therapeutic and diagnostic methods. Frequencies from RF as low as 400 kHz through microwave frequencies as high as 10 GHz are presently used for therapeutic applications in areas such as cardiology, urology, surgery, ophthalmology, ... Mehr lesen

Simulation of a Microwave Applicator for the Treatment of Petroleum Emulsions

A. V. Vazquez [1, 2], P. M. G. Vite [3],
[1] Universidad Politécnica de Altamira, Altamira, Tamaulipas, México
[2] Universidad Tecnológica de Altamira, Altamira, Tamaulipas, México
[3] TEC/NM, Instituto Tecnológico de Ciudad Madero, Ciudad Madero, Tamaulipas, México

In Mexico there is a decline in the production of oil deposits due to the lack of effective treatment of oil emulsions, which generate a problem in the reinjection of emulsified water, transport of oil with high water content and corrosion in the oil refineries. Through the simulation ... Mehr lesen

MRI Birdcage RF Coil Resonance with Uncertainty and Relative Error Convergence Rates

J. T. Fong [1],
[1] National Institute of Standards and Technology, Gaithersburg, MD, USA

In a magnetic resonance imaging (MRI) system, it is necessary to excite the nuclei of a patient into coherent precession for imaging. This requires a coupling between the nuclei and a source of radio frequency (RF) power using a transmitter. To receive a meaningful signal, we also need ... Mehr lesen

Virtual Long Term Testing of High-Power Fiber Lasers

J. Schüttler [1], B. Neumann [1], S. Belke [1], F. Becker [1], S. Ruppik [1],
[1] Coherent | ROFIN, Hamburg, Germany

The remarkable power scaling of high power fiber lasers over the past years has become more and more challenging, because the effects of transverse mode instability (TMI) and photodarkening (PD) of the fiber are limiting the effective output power of typical industrial fiber lasers. The ... Mehr lesen

Design and Characterization of MOEMS Optical Tweezers

J. A. Andrews[1], R. Chaubey[1], G. Dwivedi[1], V. Dwivedi[1], N. Sagar[1]
[1]National MEMS Design Center, Department of Applied Physics, Shri G S Institute of Technology & Science, Indore, Madhya Pradesh, India

Optical tweezers work on the idea of non-contact Optical Pressure felt by transparent particles, when shined by coherent light source such as lasers. On the other hand when light falls on the metal it excites the electron inside it and make them free. When these free electron cloud ... Mehr lesen

Radiation Heat Transfer in Imaging Infrared Spectrometer

A. Jhaveri [1], M. Kushhare [1], A. Bhargav [1],
[1] Indian Institute of Technology Gandhinagar, Gandhinagar, Gujarat, India.

Imaging Infrared Spectrometer (IIRS) is a Hyperspectral optical imaging instrument which measures the spectra of a scene in high resolution within spectral bands covering Near Infrared (NIR) to Mid Infrared (MIR) regions. Radiation entering the spectrometer assembly governs the ... Mehr lesen

Analysis of a Prototype MRI Hybrid Birdcage RF Coil with Uncertainty Quantification (*)

J. T. Fong [1],
[1] National Institute of Standards & Technology, Gaithersbug, MD, USA

INTRODUCTION. In a magnetic resonance imaging (MRI) system (see Fig. 1), it is necessary to excite the nuclei of a patient into coherent precession for imaging. This requires coupling between the nuclei and a source of radio frequency (RF) power (the transmitter). To receive a ... Mehr lesen

Magneto-hydrodynamic Flow in Electrolyte Solutions

M. Qin[1], and H. Bau[1]
[1]Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania, Pennsylvania, USA

The paper presents and compares two models for simulating magneto-hydrodynamic flow of RedOx electrolyte in a conduit patterned with circular pillars. The first model solves the coupled Nernst-Planck and Navier-Stokes equations subjected to Butler-Volmer electrode kinetics and provides ... Mehr lesen

Erste

711–720 of 1120

Letzte