Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird
Multiphysik-Modellierung und -Simulation treiben Innovationen in Industrie und Wissenschaft voran – wie die zahlreichen Anwendungsbeispiele zeigen, die jedes Jahr in den Fachbeiträgen und Postern von Ingenieuren, Forschern und Wissenschaftlern auf der COMSOL Conference vorgestellt werden. Lassen Sie sich von den unten aufgeführten aktuellen Beiträgen inspirieren oder nutzen Sie die Schnellsuche, um eine bestimmte Präsentation zu finden oder nach Anwendungsbereich oder Konferenzjahr/-ort zu filtern.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
A synthetic Jet actuator is a device which moves a fluid in and outside a cavity, through a small aperture, by the continuous oscillation of a diaphragm. The multiphysics interaction between the piezoelectric disk, which deforms due to the alternating voltage, and the fluid makes COMSOL ... Mehr lesen
We are working on a microfabricated lysing chip that uses a piezoelectric actuator to provide ultrasonic energy to break apart cells. The device contains pillars with varying dimensions. We hypothesize that increasing the aspect ratio of pillars will increase the efficiency of the ... Mehr lesen
The present work focuses on the use of piezoelectric materials as actuators for shape control of composite laminates such as Lead Zircronate Titanate (PZT), and other piezoelectric fiber composites such as Active fiber composites (AFCs), Microfiber Composites (MFCs) which allow for ... Mehr lesen
AlGaN/GaN heterostructures are unique because the 2DEG at the interface is created by the difference in polarization properties of the AlGaN and the GaN layers; not due to intentional doping. In this work, a 3D model of an electrostatically actuated micro cantilever has been developed ... Mehr lesen
Numerous sensors based on various sensing principles are used to measure pressures and temperatures in wellbores. Of all these sensors, piezoelectric quartz is the most preferred means of sensing pressure and temperature and is probably the only sensor to meet stringent downhole ... Mehr lesen
This paper presents an ongoing effort, motivated by developing self-contained sensors for structural health monitoring of inflatable structures, to model the process of extracting useable electrical power from the mechanical vibrations of thin, prestressed membrane structures. Energy ... Mehr lesen
In order to transmit energy in one direction, sonar flextensional transducers are combined into arrays of elements that are spaced a 1/4 wavelength apart. The directionality (front-to-back pressure ratio) is a modest of 6 dB. A single projector that is 1/3 wavelength in size and capable ... Mehr lesen
The feasibility of phase-sensitive detection of angular-rates using bi-directional orbiting piezoresonators suspended by thick annular springs with thin-film aluminium nitride piezoactuators on top of them was investigated. The ring-shaped flexures are more suitable for supporting the ... Mehr lesen
In this work, we have taken a model which is simulated using COMSOL Multiphysics®. It was used as a tool to design, characterize and to simulate an example which is nanofibers based piezoelectric energy generators. The results are compared with other available sources but using with ... Mehr lesen
The possibility to dispose of two-dimensional (2D) approaches to problems originally posed in a three-dimensional (3D) geometry is always desirable since it reduces significantly the computing resources needed for numerical studies. In this work we report on a new 2D approach called ... Mehr lesen
