Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird

Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.

Sehen Sie sich die Kollektion für die COMSOL Conference 2023 an

Alle

Bengaluru 2023

Munich 2023

Structural Mechanics and Thermal Stressesx

Snap Buckling of a Constrained Photomechanical Switch Driven by Elastic Instability

M. L. Smith [1], A. A. Sicard [1], A. A. Skandani [2], M. R. Shankar [2],
[1] Hope College, Holland, MI, USA
[2] University of Pittsburgh, Pittsburgh, PA, USA

Photomechanical materials experience strains in response to light of certain wavelengths. These remotely triggered, photo-induced strains lead to large-scale deformations, presenting significant opportunities for wireless actuators and light-driven morphing structures. A large space of ... Mehr lesen

Advanced Multiphysics Thermal Hydraulic Models for the High Flux Isotope Reactor

P. K. Jain [1], J. D. Freels [1],
[1] Oak Ridge National Laboratory, Oak Ridge, TN, USA

Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium to low-enriched uranium fuel are ongoing at ORNL as part of an effort sponsored by the U.S. Global Threat Reduction Initiative program. HFIR is a very high flux, ... Mehr lesen

A Comparison of Mass Reduction Methods for Silicon-on-Oxide (SOI)-based Micromirrors

H. J. Hall [1], L. A. Starman [1],
[1] Sensors Directorate, Air Force Research Laboratory, Wright-Patterson AFB, OH, USA

Beam steering and adaptive optics micromirror applications commonly demand optically flat surfaces with minimal mass. When reflective coatings (usually metallic Au or Al) are applied to micromirror surfaces in order to meet optical reflectivity requirements the resulting film stress ... Mehr lesen

Statistical Modeling and Contact Analysis of RF MEMS Surface

J. Liu [1], V. B. Chalivendra [1], C. Goldsmith [2], W. Huang [1],
[1] Department of Mechanical Engineering, University of Massachusetts - Dartmouth, Dartmouth, MA, USA
[2] MEMtronics Corporation, Richardson, TX, USA

Radio frequency (RF) micro-electro mechanical system(MEMS) switch works in on/off modes controlled by electrostatic forces. In off mode, rough surfaces of electrodes come into a contact to shunt the RF signal. Surface contact area has been recognized as a key factor in RF MEMS ... Mehr lesen

Infrasound Assessment of the Roller Compacted Concrete Dam: Case Study of the Portugues Dam in Ponce, PR

H. Diaz-Alvarez [1], V. P. Chiarito [1], S. McComas [1], M. H. McKenna [1],
[1] U.S. Army Engineer Research and Development Center, Vicksburg, MS, USA

The U.S. Army Corps of Engineers is currently investigating the use of infrasound sensors to monitor the health of structures of interest. Infrasound is low-frequency (2-20 Hz) acoustic energy and is capable of propagating many kilometers from the source structure. Large infrastructure, ... Mehr lesen

Bridge Scour Detection of the Feather River Bridge in Yuba City, CA through the use of Finite Element Modeling and Infrasound

A. Jordan [1], D. Whitlow [1], S. McComas [1], M. H. McKenna [1],
[1] U.S. Army Engineer Research and Development Center, Vicksburg, MS, USA

Ongoing studies by the US Army Engineer Research and Development Center (ERDC) are investigating infrasound as a means of persistent monitoring and scour detection at bridges through analysis of the frequency change of the structure caused by altered boundary conditions. Bridges ... Mehr lesen

Design and Simulation of MEMS Based Piezoelectric Insulin Micro-Pump

F. Meshkinfam [1],
[1] University of Ontario Institute of Technology, Oshawa, ON, Canada

One of the most effective treatments for diabetes type 1 and 2 is the administering Insulin. The design of positive volumetric insulin pump is significantly a multiphysics problem where the volumetric change of the main pump chamber and the pumped fluid are directly coupled. We used ... Mehr lesen

Structural Performance of Polymeric Composite Members in a Transmission Line Tower

R. Hernandez-Corona [1], I. Ramirez-Vazquez [1],
[1] Instituto de Investigaciones Eléctricas, Transmision y Distribucion, Cuernavaca, Morelos, México

On transmission lines, the theft of redundant steel members from the transmission towers has been reported in recent years. The removal of these members from the tower can result in the collapse of the tower. An alternative to avoid this problematic is to replace some steel components ... Mehr lesen

Constitutive Modeling of Polyethylene in COMSOL Multiphysics® Software

N. Elabbasi [1], J. Bergstrom [1],
[1] Veryst Engineering LLC., Needham, MA, USA

Introduction The constitutive behavior of Polyethylene, like most polymers, is nonlinear, temperature, and strain-rate dependent. It cannot be accurately represented with standard elastic-plastic or hyperelastic material models [1]. The focus of this work is on Medium Density ... Mehr lesen

Mitigation of Greenhouse Gas Leakage from Oil and Gas Wells

J. S. Crompton [1], H. Spencer [2], J. Thomas [1], K. Koppenhoefer [1]
[1] AltaSim Technologies, Columbus, OH, USA
[2] Seal Well, Calgary, AB, Canada

Pre-existing oil and gas wells and well bores represent highly permeable pathways for leakage of greenhouse gases; in Alberta alone leaks have been estimated to provide the equivalent of 3.5 million tonnes of CO2 per annum. In addition to abandoned wells without plugs, gas leakage may ... Mehr lesen

Erste

331–340 of 646

Letzte