Über 5000 Fachbeiträge und Präsentationen zur Multiphysik-Simulation

Simulation of Droplet Impingement on a Solid Surface by the Level Set Method

J. Hu[1], R. Jia[1], K. Wan[2], X. Xiong[3]
[1]Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
[2]Mechanical and Industrial Engineering, Northeastern University, Boston, MA, USA
[3]Department of Electrical Engineering, University of Bridgeport, Bridgeport, CT, USA

The dynamic behavior of droplet impingement on a solid surface is important to many engineering applications. This paper studied the dynamic behavior of a droplet impinging onto solid dry surfaces with different surface wettability using the COMSOL Multiphysics® software. The simulation ... Mehr lesen

A Three Dimensional (3D) Thermo-Hydro-Mechanical Model for Microwave Drying

T. Gulati[1], H. Zhu[1], A. K. Datta[1]
[1]Department of Biological & Environmental Engineering, Cornell University, Ithaca, NY, USA

Microwave drying of foodstuffs is a complex interplay of mass, momentum, and energy transport coupled with large deformation of the solid. To be able to better understand the microwave drying process, a fundamentals-based three dimensional (3D) multiphase porous media based model is ... Mehr lesen

A CFD Analysis of the Operating Conditions of a Multitube Pd Membrane for H2 Purification

B. Castro-Dominguez[1], R. Ma[1], A. G. Dixon[1], Y. H. Ma[1]
[1]Chemical Engineering Department, Worcester Polytechnic Institute, Worcester, MA, USA

The optimization of operating conditions in multitube membrane modules is highly complex. The multiple physics and irregular geometries involved create a challenge for predicting their behavior. This work analyzes the performance of H2 purification through a module containing seven ... Mehr lesen

Diffusion and Reaction in Fe-Based Catalyst for Fischer-Tropsch Synthesis Using Micro Kinetic Rate Expressions

A. Nanduri[1], P. L. Mills[1]
[1]Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA

Fischer-Tropsch synthesis (FTS) is a highly exothermic polymerization reaction of syngas (CO+H2) in the presence of Fe/Co/Ru-based catalysts to produce a wide range of paraffins, olefins and oxygenates, often known as syncrude. Multi-Tubular Fixed Bed Reactors (MTFBR) and Slurry Bubble ... Mehr lesen

H2SO4 Catalysis: Perspective and Opportunities for Reducing SO2 Emissions

P. L. Mills[1], A. Nagaraj[2]
[1]Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
[2]Department of Environmental Engineering, Texas A&M University, Kingsville, TX, USA

Introduction: Development of next-generation chemical processes that have zero emissions is a key environmental objective for sustainable development. The manufacture of H2SO4 by the air oxidation of SO2 to SO3 is an important technology where an opportunity exists for new catalyst ... Mehr lesen

Transport-Kinetic Interactions for SO2 Oxidation to SO3 in Particulate and Monolith Catalysts

P. L. Mills[1], A. Nagaraj[2]
[1]Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
[2]Department of Environmental Engineering, Texas A&M University, Kingsville, TX, USA

Introduction: Development of next-generation chemical processes that have zero emissions is a key environmental objective for sustainable development. The manufacture of H2SO4 by the air oxidation of SO2 to SO3 is an important technology where an opportunity exists for new catalyst ... Mehr lesen

CVD Graphene Growth Mechanism on Nickel Thin Films

K. Al-Shurman[1], H. Naseem[2]
[1]The Institute for Nanoscience & Engineering, University of Arkansas, Fayetteville, AR, USA
[2]Department of Electrical Engineering, University of Arkansas, Fayetteville, AR, USA

Chemical vapor deposition is considered a promising method for synthesis of graphene films on different types of substrate utilizing transition metals such as Ni. However, synthesizing a single-layer graphene and controlling the quality of the graphene CVD film on Ni are very ... Mehr lesen

Numerical Study of Flux Models for CO2 - Enhanced Natural Gas Recovery and Potential CO2 Storage in Shale Gas Reservoirs

N. Prajapati[1], P. L. Mills[1]
[1]Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA

This work encompasses different physics involved in fluid flow in shale gas reservoir. Non-linear equations for fluid flow are solved with COMSOL Multiphysics® PDE module. It focuses on comparing the performance of various species transport flux models by accounting for inter-molecular ... Mehr lesen

Optimization of the Herringbone Type Micromixer Using Numerical Modelling and Validation by Measurements

E. Tóth[1], K. Iván[1], P. Fürjes[2]
[1]Pázmány Péter Catholic University, Budapest, Hungary
[2]Research Centre for Natural Sciences Institute for Technical Physics and Materials Science Hungarian Academy of Sciences, Budapest, Hungary

COMSOL Multiphysics® software was used in this study to simulate mixing by diffusion and by secondary flow. Particle tracing model was applied to simulate the mixing of cells in the microchannel. Results agreed well with the measurement, an optimal herring-bone structure was proposed for ... Mehr lesen

Parameter Estimation of Anisotropic Diffusion in Clay with COMSOL Multiphysics®

R. Gerasch[1], J. Kulenkampff[1], J. Lippmann-Pipke[1]
[1]Helmholtz-Zentrum Dresden-Rossendorf, Institute of Resource Ecology, Research Site Leipzig, Leipzig, Germany

Our GeoPET camera is explicitly dedicated for and well capable of 4D monitoring of solute transport in dense geological material, c = c(x,y,z,t) [1-4]. We apply COMSOL Multiphysics® for reproducing our experiments and extracting parameter sets for our 4D problems [5-6]. By aligning ... Mehr lesen

Veröffentlichungen und Präsentationen

Schnellsuche

Sehen Sie, wie die Multiphysik-Simulation in verschiedenen Branchen eingesetzt wird