Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

PML in acoustics module and damped eigen mode

Posted 13.11.2011, 23:26 GMT-5 1 Reply

Jiangjun Zheng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

HI, All,

I am using PML in acoustics for damped eigenfrequency modeling. An example geometry can be a string anchored at two large blocks on its two ends. The two blocks are set as PML. I hope I can get the non inf Quality factor with complex frequency considering the damping inside PML.

It can be seen that the field (log10(dispacement^2))) is gradually decreasing from the anchor facets. However, only real frequency can be obtained. The Q is always infinite. Is there is anything wrong?

Thanks in advance.

Best,
J.Zheng
1 Reply Last Post 28.11.2011, 17:32 GMT-5
Jiangjun Zheng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28.11.2011, 17:32 GMT-5
Problem solved.

Thanks support@comsol.com
Problem solved. Thanks support@comsol.com

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content