Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problem with GPU acceleration

Posted 05.02.2025, 16:22 GMT-5 General, Results & Visualization, Studies & Solvers Version 6.3 2 Replies

Sergio Martinez
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi. I have this problem with the hardware acceleration in Comsol. - Feature: Time-Dependent Solver 1 (sol1/t1) Invalid dependency in boundary flux for GPU calculations. I'm trying to simulate the wave propagation in a gelatinous phantom.

Attachments:

2 Replies Last Post 06.02.2025, 10:01 GMT-5
Mads Herring Jensen COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 months ago 06.02.2025, 03:39 GMT-5

Hi Sergio

The hardware acceleration is only available for the Pressure Acoustics, Time Explicit physics interface in version 6.3 of COMSOL Multiphysics. So, if you try to add it in the solver you will get an error as the Elastic Waves interface is not prepared for this.

Please have a look at the release highlights: https://www.comsol.com/release/6.3/acoustics-module

I also noticed in our model that you wish to compute the displacement in the structure. Note that there is built-in functionality for that. You can add a sub-node to the Elastic Waves, Time Explicit Model material, that computes the displacement.

Best regards Mads

Hi Sergio The hardware acceleration is only available for the Pressure Acoustics, Time Explicit physics interface in version 6.3 of COMSOL Multiphysics. So, if you try to add it in the solver you will get an error as the Elastic Waves interface is not prepared for this. Please have a look at the release highlights: https://www.comsol.com/release/6.3/acoustics-module I also noticed in our model that you wish to compute the displacement in the structure. Note that there is built-in functionality for that. You can add a sub-node to the Elastic Waves, Time Explicit Model material, that computes the displacement. Best regards Mads

Attachments:

Sergio Martinez
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 months ago 06.02.2025, 10:01 GMT-5

Hi Sergio

The hardware acceleration is only available for the Pressure Acoustics, Time Explicit physics interface in version 6.3 of COMSOL Multiphysics. So, if you try to add it in the solver you will get an error as the Elastic Waves interface is not prepared for this.

Please have a look at the release highlights: https://www.comsol.com/release/6.3/acoustics-module

I also noticed in our model that you wish to compute the displacement in the structure. Note that there is built-in functionality for that. You can add a sub-node to the Elastic Waves, Time Explicit Model material, that computes the displacement.

Best regards Mads

Thanks for the reply. Is there another option to accelerate the simulation? My program lasts 4 hours to complete it. And are there plans to add the GPU computing feature to elastic waves module?

>Hi Sergio > >The hardware acceleration is only available for the Pressure Acoustics, Time Explicit physics interface in version 6.3 of COMSOL Multiphysics. So, if you try to add it in the solver you will get an error as the Elastic Waves interface is not prepared for this. > >Please have a look at the release highlights: >https://www.comsol.com/release/6.3/acoustics-module > >I also noticed in our model that you wish to compute the displacement in the structure. Note that there is built-in functionality for that. You can add a sub-node to the Elastic Waves, Time Explicit Model material, that computes the displacement. > >Best regards >Mads Thanks for the reply. Is there another option to accelerate the simulation? My program lasts 4 hours to complete it. And are there plans to add the GPU computing feature to elastic waves module?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content