Die Application Gallery bietet COMSOL Multiphysics® Tutorial- und Demo-App-Dateien, die für die Bereiche Elektromagnetik, Strukturmechanik, Akustik, Strömung, Wärmetransport und Chemie relevant sind. Sie können diese Beispiele als Ausgangspunkt für Ihre eigene Simulationsarbeit verwenden, indem Sie das Tutorial-Modell oder die Demo-App-Datei und die dazugehörigen Anleitungen herunterladen.
Suchen Sie über die Schnellsuche nach Tutorials und Apps, die für Ihr Fachgebiet relevant sind. Beachten Sie, dass viele der hier vorgestellten Beispiele auch über die Application Libraries zugänglich sind, die in die COMSOL Multiphysics® Software integriert und über das Menü File verfügbar sind.
This model analyzes the frequency response of a fuel tank partially filled with fluid. The tank is submitted to a vertical acceleration. Two modeling methods are considered to represent the fluid: a traditional method of smearing the mass of the fluid through the wetted surface of the ... Mehr lesen
Beispiel eines Schwingspulen-Lautsprechers, bei dem Lumped-Parameter das Verhalten der elektrischen und mechanischen Komponenten darstellen. Die Thiele-Small-Parameter (Kleinsignalparameter) dienen als Eingabe für das Lumped-Modell, das über das Interface Electric Circuit dargestellt ... Mehr lesen
This tutorial introduces the use of topology optimization in acoustics. The goal of the optimization is to find the optimal material distribution (solid or air) in a given design domain, here the ceiling of a 2D room, that minimizes the average sound pressure level in an objective ... Mehr lesen
In this tutorial the acoustic behavior of a duct or waveguide with a right angled bend is analyzed. The model uses port boundary conditions at the inlet and outlet. The ports can capture and treat non-plane propagating modes in waveguides, extending the analysis above the first cutoff ... Mehr lesen
This is a model of a MEMS microphone solved in the frequency domain including the DC prestress effects. The model is set up using the Electromechanics multiphysics interface, Thermoviscous Acoustics, and Pressure Acoustics. The microphone consists of a perforated plate and a prestressed ... Mehr lesen
This is a full vibro-electroacoustic simulation of a balanced armature transducer (BAT or also known as a receiver in some industries) which is a high-performance miniature loudspeaker often used in hearing aids and other in-ear audio products such as earbuds. The model is set up and ... Mehr lesen
This app allows to calculate the absorption coefficient and surface impedance of a sound absorbers for normal and random incidences. The computed quantities can be used when setting up boundary conditions in a Pressure Acoustics, Frequency Domain model or a Ray Acoustics model. The ... Mehr lesen
Dieses Modell zeigt, wie Sie mit dem Feature Control Function die Form eines rechteckigen Horns optimieren können, um eine bessere Antwort auf der Achse zu erzielen. Die Ergebnisse des ursprünglichen Designs werden über einen Filter-Datensatz in eine neue Komponente exportiert. Außerdem ... Mehr lesen
This small tutorial model shows how to set up a model with a solid mechanics and a pressure acoustics domain including a common perfectly matched layer (PML). The PML is used to model an open or infinite domain for both the elastic waves and the pressure waves. Three configurations of ... Mehr lesen
Ein thermoakustischer Motor ist ein Gerät ohne bewegliche Teile, das akustische Energie aus Temperaturgradienten innerhalb des Motors erzeugen kann. Er nutzt die Beziehung zwischen der Bewegung oszillierender Luft und den Temperaturänderungen in der durch die akustischen Wellen ... Mehr lesen