Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird
Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.
Sehen Sie sich die Kollektion für die COMSOL Conference 2023 an
Modeling the Behavior of a Polymer Electrolyte Membrane within a Fuel Cell Using COMSOL
One viable alternative to non-renewable fossil fuels is the fuel cell. A special class of FC i.e. Proton Exchange Membrane Fuel Cell (PEMFC) has been investigated during the present study. Membrane is a very important part of a PEMFC as most ohmic losses occurs here and limits the ... Mehr lesen
Tertiary Current Distributions on Rotating Electrodes
The tertiary current distributions on rotating electrodes are studied in this work. An acid copper sulfate electrolyte is used within an electrochemical cell of practical dimensions. The distributions of ion concentrations are obtained by the two-dimensional fluid flow simulation and the ... Mehr lesen
Development of Tiny Fuel Cells for Micro-devices on the Basis of Simulation Results
For the successful exploitation of microdevices such as microsensors, development of micro-power sources is strongly required. In this view, microbatteries and microfuel cells have been developed. Here the concept of on-chip fuel cells, which consist of all the components necessary for ... Mehr lesen
Effect of Channel Width on Fuel Cell Performance Using 3D Modelling
A three Dimensional model of the PEM Fuel cell is implemented using COMSOL Multiphysics and the channel width is varied to study the performance.Effect of channel width on the performance of the cell is studied by varying the width of the channel and keeping channel width to rib ratio ... Mehr lesen
Design of Electrochemical Machining Processes by Multiphysics Simulation
The principle of electrochemical machining (ECM) is the anodic dissolution of a metallic workpiece at the interface to a liquid ionic conductor under the influence of electric charge transport. This erosion principle works independently from the mechanical hardness of the workpiece and ... Mehr lesen
Multiphysics Simulation of an Anode-supported Micro-tubular Solid Oxide Fuel Cell (SOFC)
The high thermal stability and fast start-up behavior make micro-tubular solid oxide fuel cells (SOFCs) a promising alternative for small-scale, mobile power devices in the range of some Watts. To understand the transport phenomena inside a single micro-tubular SOFC, a 2-D, axi ... Mehr lesen
Fluid Flow and Current Density Distribution in Large-area HT PEMFCs
High temperature polymer electrolyte membrane fuel cells (HT PEMFCs) are very promising technologies when used in combined cooling and heating power (CCHP) systems. They are operated at 160°C, offering the possibility of high tolerance to fuel impurities and a possibility to use the heat ... Mehr lesen
Study of an Alkaline Electrolyzer Powered by Renewable Energy
The production of hydrogen from renewable energy surplus is seen as a key strategy for energy storage. Centro Nacional del Hidrógeno works actively in this direction by considering a strategic line in order to achieve a sustainable energy future. Alkaline electrolysis is the main ... Mehr lesen
Simulation of Electrochemical Etching of Silicon with COMSOL
Electrochemical etching of silicon (anodization) is a process that can be used for etching of forms of nearly arbitrary shapes. The difficulty of applying the process for mass production is in the many parameters influencing the process, such as electrolyte concentration and temperature, ... Mehr lesen
Numerical Analysis of Propeller-induced Low-frequency Modulations in Underwater Electric Potential Signatures of Naval Vessels in the Context of Corrosion Protection Systems
Since October 2009 the laboratory of ATE has carried out collaborative research with the WTD 71 that aims for prediction, reduction and optimization of so-called underwater electric potential (UEP) signatures. COMSOL is used to simulate potential distributions in the context of impressed ... Mehr lesen