Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird
Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.
Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an
The excessive presence of residual SiC matrix inter-fiber pores is often the main cause for the very poor mechanical strength and toughness of SiC/SiC composites manufactured by CVI (Chemical Vapour Infiltration) process. This work presents a micro/macro Microwaveassisted Chemical Vapour ... Mehr lesen
TAP (Temporary Analysis of Products) reactors are powerful instruments to study the kinetics of catalytic reactions. Their basic principle, exposition of evacuated solids of interest to narrow pulses containing very small amounts of gases, and measuring the concentrations of outgoing ... Mehr lesen
Modernization of the High Flux Isotope Reactor (HFIR) thermal-hydraulic (TH) design and safety analysis capability is an important step in preparation for the conversion of the HFIR core from a high enriched Uranium (HEU) fuel to a low enriched Uranium (LEU) fuel. Currently, an important ... Mehr lesen
Microwave discharges have a wide range of applications, such as gas conversion, material processing and surface treatment; also they can provide an efficient way for dissociation of molecular gases as CO2 and N2O. Depending on the operating pressure and temperature, non-equilibrium ... Mehr lesen
Ultrasonic technology is used for various crucial measurements in the industry; few of the most popular uses are in Non-destructive testing, flow measurement, level measurement etc. Like every other energy waveform the ultrasonic waveforms also suffers attenuation while travelling ... Mehr lesen
Two different Finite Element Method (FEM) models of the CANDU® nuclear fuel channels were compared against experimental data to determine if the curvature of the fuel channels is necessary to consider for measurements of the pressure tube to calandria tube gap. The different models were ... Mehr lesen
Due to the Paschen law the ignition voltage for plasma increases proportionally to electrode gap and pressure between electrodes. Atmospheric plasmas operating in the MHz range, being of great interest for surface treatment, require therefore high voltage power supplies, even though in ... Mehr lesen
钙钛矿纳米晶的合成通常是使用间歇式搅拌系统进行（将前驱液滴加入反溶剂甲苯）。宏观间歇式反应器在高耗能的同时，并不能保证制备的纳米晶的尺寸均匀可控，实验的重复性也不好。而微流体具有高效的传质传热特性，以及良好的可操纵性。同时体系反应体积的急剧下降使得反应过程的不确定性大大降低。这样保证所有晶体拥有相同的成核和生长环境。所以使用微反应器制备的纳米晶的尺寸均匀可控。由结晶动力学可知，结晶过程的溶液过饱和度以及晶核周围的速度场分布对产物晶体有影响。所以我们使用COMSOL软件对比了微反应器和间歇式反应器运行时的体系的速度场和浓度场的分布情况。以达到调控产物晶体的质量的目的。 Mehr lesen
The research documented herein was funded by a research contract between the Research Reactors Division (RRD) of Oak Ridge National Laboratory (ORNL) and the University of Tennessee, Knoxville (UTK) Mechanical, Aerospace and Biomedical Engineering Department (MABE). The research was ... Mehr lesen
Divertor is act as an exhaust for the nuclear fusion reactor. Main function of a divertor is to remove the heat flux from the plasma. Plasma facing components of the divertor are made up of Carbon (Graphite/CFC) and tungsten like materials[1]. Hence these materials are exposed to the ... Mehr lesen