Veröffentlichungen und Präsentationen

Schnellsuche

Ressourcen

Whitepaper

Sehen Sie, wie die Multiphysik-Simulation in Forschung und Entwicklung eingesetzt wird

Ingenieure, Forscher und Wissenschaftler aus allen Branchen nutzen die Multiphysik-Simulation, um innovative Produktdesigns und -prozesse zu erforschen und zu entwickeln. Lassen Sie sich von Fachbeiträgen und Vorträgen inspirieren, die sie auf der COMSOL Conference präsentiert haben. Durchsuchen Sie die untenstehende Auswahl, verwenden Sie die Schnellsuche, um eine bestimmte Präsentation zu finden, oder filtern Sie nach einem bestimmten Anwendungsbereich.

Sehen Sie sich die Kollektion für die COMSOL Conference 2024 an

Suchbegriff:

Simulation of Dendritic Solidification in Cubic and HCP Crystals by Cellular Automaton and Phase-Field Models

M. A. Zaeem[1], H. Yin[2], and S. D. Felicelli[3]
[1]Center for Advanced Vehicular Systems, Mississippi State University, MS
[2]Oak Ridge National Laboratory, TN
[3]Mechanical Engineering Department, Mississippi State University, MS

A cellular automaton (CA)-finite element (FE) model and a phase field (PF)-FE model were used to simulate equiaxed dendritic growth during solidification of cubic and hexagonal crystals. The governing equations of PF model include three coupled partial differential equations (PDE) for ... Mehr lesen

Effect of Channel Width on Fuel Cell Performance Using 3D Modelling

R. Pushpangadan, S. S. Dimble, and S. P. Duttagupta
IIT Bombay
Mumbai
Maharasthra, India

A three Dimensional model of the PEM Fuel cell is implemented using COMSOL Multiphysics and the channel width is varied to study the performance.Effect of channel width on the performance of the cell is studied by varying the width of the channel and keeping channel width to rib ratio ... Mehr lesen

Biosimulation of Normal Pressure Hydrocephalus Using COMSOL Multiphysics^®

K. Shahim[1], J-M. Drezet[1], J-F. Molinari[2], S. Momjian[3], and R. Sinkus[4]

[1]LSMX, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[2]LSMS, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[3]University Hospitals of Geneva and University of Geneva, Switzerland
[4]Waves and Acoustics Laboratory, ESPCI, Paris, France

A numerical finite element model of one human brain is built in COMSOL in order to study a particular form of hydrocephalus, the so called Normal Pressure Hydrocephalus (NPH). The geometry of the ventricles and the skull is obtained by Magnetic Resonance Imaging (MRI) and imported in ... Mehr lesen

Modeling of Chemo-Mechanical Coupled Behavior of Cement Based Material

D. Hu[1], F. Zhang[2], H. Zhou[3], and J. Shao[1]
[1]LML, UMR8107, CNRS, University of Lille I, Lille, France
[2]School of Civil Engineering and Architecture, Hubei University of Technology, Wuhan, China
[3]State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, China

A lixiviation-mechanical coupled model is developed for fiber reinforced concrete within this framework; both the influence of chemical degradation on short and long term mechanical behavior and the influence of mechanical loading on the diffusion coefficient can be considered. The ... Mehr lesen

Modeling and Prediction of Line Pattern Collapse

D. Bassett[1], M. Carcasi[1], W. Printz[1]
[1]Tokyo Electron America, Austin, TX, USA

In semiconductor manufacturing, effective cleaning of structures with liquid is one of the most important and potentially difficult process steps. It is important because it remains the cheapest and most cost-effective method to remove particles and residues from the structures in order ... Mehr lesen

Inverse Model for Solving Partial Differential Equations Using a Stochastic Method and COMSOL Multiphysics®

E. Khosrowshahli[1], A. Jeremic[1]
[1]McMaster University, Hamilton, ON, Canada

Partial differential equations (PDEs) govern many phenomena in nature. Solving optimization problems which comprises the solution of large number of PDEs, is expensive concerning time and memory. Therefore, to reduce the solution cost, original problem is transformed to a corresponding ... Mehr lesen

Simulation of Acoustic Energy Harvesting Using Piezoelectric Plates in a Quarter-Wavelength Straight-Tube Resonator

B. Li[1], J.H. You[1]
[1]Southern Methodist University, Dallas, TX, USA

An acoustic energy harvesting mechanism at low frequency (~200 Hz) using lead zirconate titanate (PZT) piezoelectric cantilever plates placed inside a quarter-wavelength straight-tube resonator has been studied using COMSOL Multiphysics 4.3 and compared with experimental data. When the ... Mehr lesen

Experimental and Numerical Study of Microbial Improved Oil Recovery in a Pore Scale Model by using COMSOL

M. Shabani Afrapoli, L. Shidong, S. Alipour , and O. Torsaeter
Department of Petroleum Engineering and Applied Geophysics
NTNU
Trondheim, Norway

A number of visualization experiments are carried out at the laboratory temperature with oil, brine and bacteria suspension for evaluating the performance of MIOR in a glass micromodel. The observations show the effects of bacteria on remaining oil saturation. The interfacial tension ... Mehr lesen

Effect of Fluid Conditions on Air-Liquid Interface in Hydrophobic Micro Textured Surface

S. Takahashi[1], S. Ogata[1]
[1]Tokyo Metropolitan University Hachioji City, Tokyo, Japan

We studied the influence of a number of gas-liquid interface on the drag reduction effect by numeric simulation. Level set method was used for an analysis of gas-liquid interface. The analytic model is rectangular channel of height h = 5 micrometer and width w = 20 micrometer with two ... Mehr lesen

Innovating New Products using Multiphysics Modeling

Dr. Shekhawat is currently the General Manager for New Products Development at Secure Meters Ltd., Udaipur. Prior to this, he was with CEERI, Pilani for 23 years. He has a Ph.D., MS, M. Sc. (Physics) and BE (EEE) from BITS, Pilani. He is the recipient of several honours including the ... Mehr lesen

Erste

821–830 of 902

Letzte